Category
- Products
- Contact us
Uninterruptible power supply Supplier
info@upspowersupply.netWhy is the UPS Power Supply not Working Properly?
Case 1: The newly installed UPS power supply does not start properly.
This situation may be caused by two reasons. The user can first check if the battery connection plug on the rear panel of the UPS power supply is connected. If not, you can open the front panel to check if the battery is connected.
Case 2: After the UPS power supply is working for a period of time, the UPS power supply cannot be started normally.
Because the battery is low, you need to charge the battery.
Case 3: UPS power supply battery used for about 2 years, UPS power can not start.
This situation is generally caused by the battery's more or less battery capacity loss or inertia of the battery after two years of use. If the battery does not play a role in delay, users need to consider replacing the new battery. To avoid the problem of inertia in the battery, we can use the battery automation management software.
Case 4: the voltage of a single battery is normal, but the UPS power can not be started.
1. It is likely that there is a problem between the connection between the battery and the battery or the connection between the battery and the UPS power supply. For example, the connection point is not strong or the connection point is oxidized. At this time, it is necessary to remove the oxide and reconnect.
2. It may be that the UPS power supply and the battery connection are broken. If the insurance is broken, you can change the insurance.
3. The connection between the UPS power supply and the battery is very long, very thin or has a connection point in the middle, so a large voltage drop is generated, and the UPS power supply cannot be started.
This situation may be caused by two reasons. The user can first check if the battery connection plug on the rear panel of the UPS power supply is connected. If not, you can open the front panel to check if the battery is connected.
Case 2: After the UPS power supply is working for a period of time, the UPS power supply cannot be started normally.
Because the battery is low, you need to charge the battery.
Case 3: UPS power supply battery used for about 2 years, UPS power can not start.
This situation is generally caused by the battery's more or less battery capacity loss or inertia of the battery after two years of use. If the battery does not play a role in delay, users need to consider replacing the new battery. To avoid the problem of inertia in the battery, we can use the battery automation management software.
Case 4: the voltage of a single battery is normal, but the UPS power can not be started.
1. It is likely that there is a problem between the connection between the battery and the battery or the connection between the battery and the UPS power supply. For example, the connection point is not strong or the connection point is oxidized. At this time, it is necessary to remove the oxide and reconnect.
2. It may be that the UPS power supply and the battery connection are broken. If the insurance is broken, you can change the insurance.
3. The connection between the UPS power supply and the battery is very long, very thin or has a connection point in the middle, so a large voltage drop is generated, and the UPS power supply cannot be started.
Post a Comment:
You may also like:
